← Back to all courses Ku noqo dhammaan koorsooyinka

Math · Grades 11 to 12

Calculus 1

Limits, derivatives and their rules, related rates, curve sketching and optimization, antiderivatives, the definite integral and the Fundamental Theorem, with real rate and accumulation problems.

Somali support text on this page is a draft, needs native review. Qoraalka Soomaaliga waa qabyo oo wuxuu sugayaa dib-u-eegis.

Title page of the first edition of Newton's Principia Mathematica, 1687
Newton, Principia, 1687. Image credit
1
credit
10
units
14.3 h
of video

About this course

Calculus 1 is a one-credit course for grades 11 and 12. It follows Pre-Calculus and introduces the two big ideas of calculus: the derivative, which measures how fast something changes, and the integral, which adds up change over time. You begin with limits and continuity, then learn derivatives, the rules for finding them, and how to use them for related rates, graph analysis, optimization and approximation. The second half of the course turns to antiderivatives, the definite integral, the Fundamental Theorem of Calculus and substitution, and ends with area, accumulation, average value and motion. Minnesota's standards do not list calculus benchmarks, so the course uses Common Core standards, Minnesota function and geometry benchmarks, and course targets labeled C1. Examples come from Minnesota temperatures and lakes, rainfall and crop yield in East Africa, matatu fuel use and the depth of Lake Victoria. This is a college-prep course, not an AP course. Each unit has short video lessons with checkpoints, guided notes, practice and a project.

Before you start

Pre-Calculus.

What you will learn
  • Students will estimate a limit from a graph or a table and explain when a limit does not exist.
  • Students will find an average rate of change and show it as the slope of a secant line.
  • Students will differentiate powers, constant multiples, sums and differences, including polynomials.
  • Students will identify an outer and inner function and use the chain rule to differentiate a composite.
  • Students will draw a labeled picture and list the given rates, the unknown rate and the units.
  • Students will find critical points and use the first derivative to find where a function increases and decreases.
  • Students will state the Mean Value Theorem, check its conditions, and find the point it guarantees.
  • Students will find antiderivatives of powers, sums, sine, cosine and e to the x, and check by differentiating.
  • Students will use the Fundamental Theorem of Calculus to evaluate a definite integral.
  • Students will find the area between a curve and the x-axis and between two curves.

Units and lessons

Unit 1: Limits and continuity
  1. What is a limit?
  2. Introduction to limits
  3. Approximating limits using tables
  4. Limits from graphs
  5. One-sided limits from graphs
  6. Limits by direct substitution
  7. Limits by factoring
  8. Infinite limits and asymptotes
  9. Limits at infinity using algebra
  10. Types of discontinuities
  11. Continuity at a point
Unit 2: The derivative
  1. The essence of calculus (circle area, integrals and derivatives)
  2. Secant lines and average rate of change
  3. Instantaneous rate of change
  4. Derivative as a concept
  5. Derivative as slope of a curve
  6. The derivative and tangent line equations
  7. Finding a derivative using the definition
  8. Finding a derivative of a function using limits
  9. Derivative notations: dy/dx, d/dx and dy/dt
  10. Estimating derivatives from a table
  11. Differentiability at a point: graphical
  12. Differentiability and continuity
Unit 3: Differentiation rules
  1. The power rule
  2. Power rule: constants, reciprocals and roots
  3. Constant multiple, sum and difference rules
  4. Differentiating polynomials
  5. Power rule with rewriting: reciprocals and roots
  6. The product rule
  7. The product rule for derivatives: worked examples
  8. Product rule practice: polynomials, three factors and values
  9. The quotient rule
  10. The quotient rule with a memory phrase
  11. Quotient rule with given values
  12. Higher order derivatives
Unit 4: Chain rule and special functions
  1. Chain rule
  2. Common chain rule misunderstandings
  3. The Chain Rule: outside-inside examples
  4. Derivatives of sin(x) and cos(x)
  5. Derivatives of tan(x) and cot(x)
  6. Chain rule with trig functions
  7. Derivatives of exponential functions
  8. Derivative of the natural logarithm
  9. Derivative of ln(x) using the chain rule
  10. Implicit differentiation
  11. Worked example: implicit differentiation
  12. Implicit differentiation with the product rule
Unit 5: Applications: related rates
  1. Related rates: a growing ripple
  2. Related rates basics with implicit differentiation
  3. Related rates: a sliding ladder
  4. Related rates: approaching cars
  5. Related rates: a rising hot air balloon
  6. Related rates: filling a cone
  7. Related rates: a diving owl's shadow
  8. Related rates: units and given information
  9. Related rates: choosing the equation for two cars
  10. Related rates: filling a cylinder tank
  11. Related rates: circles, spheres and a melting snowball
  12. Related rates: price and quantity
Unit 6: Applications: curve analysis and optimization
  1. Critical points introduction
  2. Finding where a function increases from its derivative
  3. Finding relative extrema with the first derivative test
  4. Extreme value theorem
  5. Finding absolute extrema on a closed interval
  6. Analyzing concavity with the second derivative
  7. Inflection points introduction
  8. Second derivative test
  9. Connecting f, f′ and f″ graphically
  10. Optimization introduction
  11. Optimization with a box made from a sheet
  12. Optimization with the cost of materials
Unit 7: Mean value theorem, linearization and L'Hopital's rule
  1. Mean value theorem: the big idea
  2. Mean value theorem: finding c for a polynomial
  3. Rolle's theorem with examples
  4. Local linearization: estimating a square root
  5. Local linearization: a logarithm example
  6. Finding the linearization at a point
  7. Tangent line approximation of a square root
  8. Introduction to L'Hopital's rule
  9. L'Hopital's rule: repeated use
  10. L'Hopital's rule: limits at infinity
  11. L'Hopital's rule and indeterminate quotients
  12. Limits and L'Hopital's rule from the ground up
Unit 8: Antiderivatives and the definite integral
  1. Introduction to integral calculus
  2. Antiderivatives and indefinite integrals
  3. Reverse power rule
  4. Indefinite integrals: sums and multiples
  5. Indefinite integrals of sin(x), cos(x), and e^x
  6. Initial value problems
  7. Riemann approximation introduction
  8. Midpoint sums
  9. Trapezoidal sums
  10. Over- and under-estimation of Riemann sums
  11. Definite integral as the limit of a Riemann sum
  12. The definite integral and its definition
Unit 9: Fundamental Theorem of Calculus and substitution
  1. Integrals and the Fundamental Theorem of Calculus
  2. Fundamental theorem of calculus, part 1
  3. Fundamental theorem of calculus, part 2
  4. Why the second part of the theorem works
  5. Properties of definite integrals
  6. Introduction to u-substitution
  7. u-substitution with a missing constant
  8. Choosing u in u-substitution
  9. u-substitution with definite integrals
  10. u-substitution with an exponential
Unit 10: Applications of integrals and modeling review
  1. Area between curves
  2. Area under a curve and the definite integral
  3. Worked example: area between curves
  4. Calculating the average value of a function
  5. Mean value theorem for integrals
  6. Interpreting the definite integral as net change
  7. Worked example: accumulation from a rate graph
  8. Motion with integrals: displacement and distance
  9. Worked example: motion from acceleration
  10. Interpreting the meaning of the derivative in context
  11. Optimization: maximizing profit
  12. What does area have to do with slope?
Minnesota standards

Aligned to the Minnesota K-12 Academic Standards (benchmark codes are shown on each unit).

Unit 1: Limits and continuity

  • C1.1 Limits and continuity. Estimate limits from graphs and tables; find one-sided limits; evaluate limits by substitution, factoring and rationalizing; find limits at infinity and infinite limits; use limits to define continuity and classify discontinuities.
  • 9.3.7.6 Find the domain and range of functions defined symbolically, graphically or in a context, including piecewise and step functions. Express solutions and recognize that some answers obtained may not be valid, including cases where the function inputs are discrete instead of continuous.
  • 9.3.7.7 Describe the graph of a function using key features such as intercepts, maxima/minima, intervals of increase and decrease and end behavior. Draw conclusions from graphs of functions and other relations.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-IF.B.5 Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.
  • F-IF.C.7 Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases. Parts used: a (linear and quadratic), b (square root, cube root, piecewise), c (polynomial functions), d ((+) rational functions, asymptotes, end behavior), e (exponential, logarithmic and trigonometric functions).
  • A-APR.D.6 Rewrite simple rational expressions in different forms; write a(x)/b(x) in the form q(x) + r(x)/b(x), using inspection, long division, or, for the more complicated examples, a computer algebra system.

Unit 2: The derivative

  • C1.2 The derivative. Find average rates of change; define the derivative as the limit of the difference quotient; interpret it as a tangent slope and an instantaneous rate of change; write tangent lines; relate differentiability to continuity.
  • F-IF.A.1 Understand that a function from one set to another assigns to each element of the domain exactly one element of the range; use function notation.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
  • F-LE.B.5 Interpret the parameters in a linear or exponential function in terms of a context.
  • 9.3.7.10 Use the concept of a function as a connection between inputs and outputs to find function values and use function notation.
  • N-Q.A.1 Use units as a way to understand problems and to guide the solution of multi-step problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays.

Unit 3: Differentiation rules

  • C1.3 Differentiation rules. Differentiate with the power, constant multiple, sum, difference, product and quotient rules; find second derivatives.
  • 9.3.6.1 Add, subtract and multiply polynomials.
  • 9.3.7.10 Use the concept of a function as a connection between inputs and outputs to find function values and use function notation.
  • A-SSE.A.2 Use the structure of an expression to identify ways to rewrite it.
  • F-IF.C.8 Write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function.
  • A-APR.D.7 (+) Understand that rational expressions form a system analogous to the rational numbers, closed under addition, subtraction, multiplication, and division by a nonzero rational expression; add, subtract, multiply and divide rational expressions.

Unit 4: Chain rule and special functions

  • C1.4 Chain rule and special functions. Use the chain rule; differentiate trigonometric, exponential and logarithmic functions; use implicit differentiation.
  • 9.3.5.9 Find and evaluate the composition of multiple functions.
  • F-BF.A.1 Write a function that describes a relationship between two quantities; part c: (+) compose functions.
  • F-BF.B.4 Find inverse functions. Parts used: a (solve f(x) = c for an invertible f), b ((+) verify by composition that one function is the inverse of another).
  • F-BF.B.5 (+) Understand the inverse relationship between exponents and logarithms and use this relationship to solve problems involving logarithms and exponents.
  • F-LE.A.4 For exponential models, express as a logarithm the solution to ab^(ct) = d where a, c, and d are numbers and the base b is 2, 10, or e; evaluate the logarithm using technology.
  • F-TF.B.5 Choose trigonometric functions to model periodic phenomena with specified amplitude, frequency, and midline.
  • F-IF.C.7 Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases. Parts used: a (linear and quadratic), b (square root, cube root, piecewise), c (polynomial functions), d ((+) rational functions, asymptotes, end behavior), e (exponential, logarithmic and trigonometric functions).

Unit 5: Applications: related rates

  • C1.5 Related rates. Model changing quantities with an equation, differentiate with respect to time, and solve for an unknown rate with units.
  • 9.2.3.3 Use trigonometric ratios and the Pythagorean Theorem and its converse to solve contextual situations, including right triangles or polygons that can be decomposed into triangles.
  • 9.2.3.5 Use the formulas for surface area and volume of various three-dimensional figures to solve multi-step contextual situations.
  • G-GMD.A.3 Use volume formulas for cylinders, pyramids, cones, and spheres to solve problems.
  • G-SRT.C.8 Use trigonometric ratios and the Pythagorean Theorem to solve right triangles in applied problems.
  • A-CED.A.1 Create equations and inequalities in one variable and use them to solve problems.
  • F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
  • N-Q.A.1 Use units as a way to understand problems and to guide the solution of multi-step problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays.
  • N-Q.A.2 Define appropriate quantities for the purpose of descriptive modeling.

Unit 6: Applications: curve analysis and optimization

  • C1.6 Curve analysis and optimization. Use the first and second derivatives to find critical points, increasing and decreasing intervals, extrema, concavity and inflection points; sketch graphs; solve optimization problems.
  • 9.3.7.7 Describe the graph of a function using key features such as intercepts, maxima/minima, intervals of increase and decrease and end behavior. Draw conclusions from graphs of functions and other relations.
  • 9.3.7.2 Translate between graphs of quadratic, exponential and other functions (including absolute value, rational and polynomial), tables and symbolic representations. Sketch graphs and use graphing technology to graph functions.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-IF.B.5 Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes.
  • F-IF.C.7 Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases. Parts used: a (linear and quadratic), b (square root, cube root, piecewise), c (polynomial functions), d ((+) rational functions, asymptotes, end behavior), e (exponential, logarithmic and trigonometric functions).
  • A-CED.A.1 Create equations and inequalities in one variable and use them to solve problems.
  • 9.2.3.7 Compute the unit cost and total cost to cover different areas and volumes in applications, such as painting, carpeting [...] and gardening. Optimize costs for various models, including linear and quadratic. Use technology, including spreadsheets.

Unit 7: Mean value theorem, linearization and L'Hopital's rule

  • C1.7 Mean value theorem, linearization and L'Hopital's rule. State and apply the Mean Value Theorem; write and use linearizations; evaluate indeterminate limits with L'Hopital's rule.
  • F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-IF.C.7 Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases. Parts used: a (linear and quadratic), b (square root, cube root, piecewise), c (polynomial functions), d ((+) rational functions, asymptotes, end behavior), e (exponential, logarithmic and trigonometric functions).
  • F-BF.B.5 (+) Understand the inverse relationship between exponents and logarithms and use this relationship to solve problems involving logarithms and exponents.
  • 9.3.7.2 Translate between graphs of quadratic, exponential and other functions (including absolute value, rational and polynomial), tables and symbolic representations. Sketch graphs and use graphing technology to graph functions.

Unit 8: Antiderivatives and the definite integral

  • C1.8 Antiderivatives and the definite integral. Find antiderivatives and indefinite integrals; use initial conditions; approximate area with Riemann sums and trapezoids; define the definite integral as a limit.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-LE.B.5 Interpret the parameters in a linear or exponential function in terms of a context.
  • N-Q.A.1 Use units as a way to understand problems and to guide the solution of multi-step problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays.
  • G-GPE.B.7 Use coordinates to compute perimeters of polygons and areas of triangles and rectangles, e.g., using the distance formula.

Unit 9: Fundamental Theorem of Calculus and substitution

  • C1.9 Fundamental Theorem of Calculus and substitution. Use both parts of the Fundamental Theorem; use properties of definite integrals; integrate by substitution.
  • 9.3.5.9 Find and evaluate the composition of multiple functions.
  • F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
  • F-BF.A.1 Write a function that describes a relationship between two quantities; part c: (+) compose functions.
  • F-LE.B.5 Interpret the parameters in a linear or exponential function in terms of a context.

Unit 10: Applications of integrals and modeling review

  • C1.10 Applications of integrals and modeling. Find area between curves, average value, net change, displacement and distance; model real situations with derivatives and integrals.
  • F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description.
  • F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
  • F-BF.A.1 Write a function that describes a relationship between two quantities; part c: (+) compose functions.
  • F-LE.B.5 Interpret the parameters in a linear or exponential function in terms of a context.
  • A-CED.A.1 Create equations and inequalities in one variable and use them to solve problems.
  • N-Q.A.1 Use units as a way to understand problems and to guide the solution of multi-step problems; choose and interpret units consistently in formulas; choose and interpret the scale and the origin in graphs and data displays.
  • N-Q.A.3 Choose a level of accuracy appropriate to limitations on measurement when reporting quantities.
  • 9.3.7.1 Represent and solve situations in various contexts, including financial literacy, using systems of linear equations, systems of linear inequalities and exponential and quadratic functions.
  • 9.2.3.7 Compute the unit cost and total cost to cover different areas and volumes in applications, such as painting, carpeting [...] and gardening. Optimize costs for various models, including linear and quadratic. Use technology, including spreadsheets.

← Back to all courses